company profile products contact home
	DC 10000		DC 10000  DC 10000 HA Cooling capacity 3000 Watt – 10000 BTU 3000 Watt – 10000 BTU Power consumption 672 Watt 24 or 48 VDC 770 Watt 24 or 48 VDC Size mm Size inches 700 W x 350D  x 1000H 27,5W x 13,0D x 40,0 H 700 W x 350D  x 1000H 27,5W x 13,0D x 40,0 H Weight 70kg / 152 lbs 72kg / 155 lbs Max. outdoor ambient 45 ºC / 113 ºF 55 ºC / 131 ºF Low voltage settings (Unit will shut down if there is a low voltage) 24 VDC = 21,5 volt 48 VDC = 43,0 volt 24 VDC = 21,5 volt 48 VDC = 43,0 volt Restart settings (If there was a low voltage the unit will restart at) 24 VDC = 26,0 volt 48 VDC = 52,0 volt 24 VDC = 26,0 volt 48 VDC = 52,0 volt High pressure switch 24 bar 24 bar Low pressure switch 2 bar 2 bar Safety switches Max. temperature compressor and motor Max. temperature compressor and motor Coolant/ refrigerant R134a R134a Brochure brochure User manual manual Photo gallery photo gallery
	DC 10000 HA
DC Airco telecom products are availably in 24 and 48 vdc. The first product in this series was developed to work if there is a power black out. Now days there are sites where the customer removes the normal grid air conditioners and replace them with DC 10000’s because of its total energy consumption and its ability to work from the battery bank. In other cases the site is turn in to a solar/wind energy drive site or to save fuel and reduce running hours of the generators the 230/115 volt driven Air conditioners are replaced by the DC10000.   DC Airco type 10000 is designed specially to cool telecom shelters and other enclosures  in remote area’s  Introduced in 2002 to work as a back up system when the grid as a power failure. It is now days used in different settings, as fuel saver on generator driven cell sites,  on solar and wind energy, or as energy saver and back up system on sites with a normal 230/115 volt AC grid connection. This product is used in parts of Africa, southern Europe, Caribbean, and Australia at temperatures till 45 degrees Celsius (113°F)   DC 9200 The DC9200 24 or 48 volt is a split-unit. This is one of two split units that are special made for telecom shelters that are running and there is no place for the DC10000. Because of the hoses with quick connectors between the condenser en evaparator unit, It is easy to install with out any disturbance on the running equipment.       DC 9200 Cooling capacity 3000 Watt – 10000 BTU Power consumption 672 Watt 24 or 48 VDC Size mm   outdoor unit 710 W x 461 D  x 320 H indoor unit 676 W x 155 D x588 H Weight outdoor unit  50 kg / 152 lbs indoor unit 20 kg / 60 lbs Max. outdoor ambient 55 ºC / 131 ºF Low voltage settings (Unit will shut down if there is a low voltage) 24 VDC = 21,5 volt 48 VDC = 43,0 volt Restart settings (If there was a low voltage the unit will restart at) 24 VDC = 26,0 volt 48 VDC = 52,0 volt High pressure switch 24 bar Low pressure switch 2 bar Safety switches Max. temperature compressor and motor Coolant/ refrigerant R134a   DC 17000 The DC17000 24 or 48 volt is a split-unit and two indoor unit,s. This is one of two split units that are special made for telecom shelters that are running and there is no place for the DC10000. Because of the hoses with quick connectors between the condenser en evaparator unit, It is easy to install with out any disturbance on the running equipment.   DC 17000 Cooling capacity 5000Watt – 17000 BTU Power consumption depending on fan configuration 1100-1400 Watt 24 or 48 VDC Size mm   outdoor unit 710 W x 461 D  x 320 H indoor 676 W x 155 D x 588 H Weight outdoor unit  50 kg/ 152 lbs indoor unit 20 kg/ 60 lbs Max. outdoor ambient 45 ºC / 113 ºF Low voltage settings (Unit will shut down if there is a low voltage) 24 VDC = 21,5 volt 48 VDC = 43,0 volt Restart settings (If there was a low voltage the unit will restart at) 24 VDC = 26,0 volt 48 VDC = 52,0 volt High pressure switch 24 bar Low pressure switch 2 bar Safety switches Max. temperature compressor and motor Coolant/ refrigerant R134a     Generator powered BTS stations With replacing the existing 230 VAC Air Conditioners by DC Airco units the running hours og the gensets can be reduced from 24/7 till less than 10 hours a day. (1) payback in less than 5 months. (2) less pollution.           Grid powered BTS stations With replacing the 230 or 380 VAC Air Conditioners for DC Airco units the station keeps on working during power outages and unstable grid. (1) no backup generator needed. (2) no interruted service for the subscriber. (3) less energy cosumption.               Remote BTS stations Using DC Airco units makes it possible to run the station on solar and/or wind energy. Depending on the location. (1) no fuel consumption. (2) no pollution.